交换机分出来的路由器怎么设置,从交换机上接出的路由器如何设置

首页 > 实用技巧 > 作者:YD1662023-12-20 09:27:51

在网络架构中,三层交换机和路由器都扮演着非常重要的角色。三层交换机主要用于在局域网内部进行数据包转发和过滤,而路由器则用于连接不同的网络并进行路由选择和跨网络通信。正确配置三层交换机和路由器可以提高网络的性能和安全性,从而确保网络的正常运行。然而,由于网络配置的复杂性和多样性,不同的网络架构可能需要不同的配置方法。在本篇文章中,我整理了一份通用的三层交换机和路由器配置方法,以帮助有需要的友友们更好地了解相关技能。希望友友们可以从中获得一些有用的信息。

实验内容及目标:

1、不同Vlan 下的客户端能够访问外网【2.2.2.1】

2、了解路由器和三层交换机之间的连接及配置

3、了解三层交换机和接入交换机之间的连接及配置

实验拓扑图:

交换机分出来的路由器怎么设置,从交换机上接出的路由器如何设置(1)

实验设备及版本:

本实验所用到的设备为:

1、交换机:华为 Quidway S5700-28C-HI VRP (R) software, Version 5.110

2、路由器:华为 AR1200 VRP (R) software, Version 5.130

3、PC主机:

实验过程:

一、建立物理连接

按照拓扑图进行组网

二、接入交换机配置

交换机分出来的路由器怎么设置,从交换机上接出的路由器如何设置(2)

这里以红框内的第一个交换机为例

<Huawei>sys Enter system view, return user view with Ctrl Z. [Huawei] [Huawei]sysname [Huawei]sysname switch1 Apr 9 2023 19:11:09-08:00 switch1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011. 5.25.191.3.1 configurations have been changed. The current change number is 4, t he change loop count is 0, and the maximum number of records is 4095. [switch1]undo info-center enable Info: Information center is disabled. [switch1] #创建VLAN [switch1] [switch1]vlan bat [switch1]vlan batch 1 to 3 Info: This operation may take a few seconds. Please wait for a moment...done. [switch1] #将接口加入到vlan 中 [switch1]interface GigabitEthernet 0/0/2 [switch1-GigabitEthernet0/0/2]port link-type access [switch1-GigabitEthernet0/0/2]port default vlan 1 [switch1-GigabitEthernet0/0/2]q [switch1] [switch1]interface GigabitEthernet 0/0/3 [switch1-GigabitEthernet0/0/3]port link-type access [switch1-GigabitEthernet0/0/3]port default vlan 1 [switch1-GigabitEthernet0/0/3]q [switch1] [switch1] #设置与三层核心交换机相连的接口为trunk,并设置运行通过vlan 1,vlan2,vlan3 [switch1]interface GigabitEthernet 0/0/1 [switch1-GigabitEthernet0/0/1]dis this # interface GigabitEthernet0/0/1 # return [switch1-GigabitEthernet0/0/1]port link-type trunk [switch1-GigabitEthernet0/0/1] [switch1-GigabitEthernet0/0/1]port trunk allow-pass vlan 1 to 3 [switch1-GigabitEthernet0/0/1] [switch1-GigabitEthernet0/0/1]q [switch1]

其他的几个接入交换机配置过程相同,配置时,注意接口。

三、三层交换机配置

交换机分出来的路由器怎么设置,从交换机上接出的路由器如何设置(3)

#创建VLAN接口并配置IP地址: <Huawei>sys Enter system view, return user view with Ctrl Z. [Huawei]undo in [Huawei]undo info-center en [Huawei]undo info-center enable Info: Information center is disabled. [Huawei] [Huawei]interface Vlanif 1 [Huawei-Vlanif1]ip address 192.168.1.1 24 [Huawei-Vlanif1] [Huawei-Vlanif1]q [Huawei]int [Huawei]interface vlan [Huawei]interface Vlanif 2 Error: The VLAN does not exist. [Huawei]vlan batch 2 to 3 Info: This operation may take a few seconds. Please wait for a moment...done. [Huawei] [Huawei]interface Vlanif 2 [Huawei-Vlanif3] [Huawei-Vlanif3]ip ad [Huawei-Vlanif3]ip address 192.168.2.1 24 [Huawei-Vlanif3] [Huawei-Vlanif3]q [Huawei]int [Huawei]interface vla [Huawei]interface Vlanif 3 [Huawei-Vlanif3] [Huawei-Vlanif3] [Huawei-Vlanif3]ip add [Huawei-Vlanif3]ip address 192.168.3.1 24 [Huawei-Vlanif3] [Huawei-Vlanif3] [Huawei-Vlanif3]q [Huawei] [Huawei] [Huawei]sysna [Huawei]sysname Switch-Hexin [Switch-Hexin] [Switch-Hexin] #配置三层交换机上连接到接入交换机的接口为Trunk模式,并允许相应VLAN通过: [Switch-Hexin]interface GigabitEthernet 0/0/2 [Switch-Hexin-GigabitEthernet0/0/2]port link-type trunk [Switch-Hexin-GigabitEthernet0/0/2]port trunk allow-pass vlan 1 to 3 [Switch-Hexin-GigabitEthernet0/0/2]q # 配置与路由器相连的接口 [Switch-Hexin] [Switch-Hexin]vlan batch 10 Info: This operation may take a few seconds. Please wait for a moment...done. [Switch-Hexin] [Switch-Hexin]interface GigabitEthernet 0/0/1 [Switch-Hexin-GigabitEthernet0/0/1] [Switch-Hexin-GigabitEthernet0/0/1]port link-type access [Switch-Hexin-GigabitEthernet0/0/1]port default vlan 10 [Switch-Hexin-GigabitEthernet0/0/1]q [Switch-Hexin]interface Vlanif 10 [Switch-Hexin-Vlanif10]ip address 192.168.10.2 24 [Switch-Hexin-Vlanif10] [Switch-Hexin-Vlanif10]q [Switch-Hexin] #配置静态路由 [Switch-Hexin] [Switch-Hexin]ip route-static 0.0.0.0 0.0.0.0 192.168.10.1 [Switch-Hexin]

四、路由器配置

[Router]interface GigabitEthernet 0/0/1 [Router-GigabitEthernet0/0/1]ip address 192.168.10.1 255.255.255.0 [Router-GigabitEthernet0/0/1]q [Router]interface GigabitEthernet 0/0/0 [Router-GigabitEthernet0/0/0]ip address 2.2.2.2 24 [Router-GigabitEthernet0/0/0] [Router-GigabitEthernet0/0/0]q [Router]ip route-static 0.0.0.0 0.0.0.0 2.2.2.1 [Router] [Router]ip route-static 192.168.0.0 255.255.0.0 192.168.10.2 [Router] #配置NAT 转换 [Router]acl number 2001 [Router-acl-basic-2001]rule 5 permit source 192.168.0.0 0.0.255.255 [Router-acl-basic-2001]q [Router]interface GigabitEthernet 0/0/0 [Router-GigabitEthernet0/0/0]nat outbound 2001 [Router-GigabitEthernet0/0/0]qu [Router]

五、测试:

交换机分出来的路由器怎么设置,从交换机上接出的路由器如何设置(4)

写在最后:

自我设限,固步自封,唯有突破极限,才能发掘潜能。以上就是本期整理的《三层交换机与路由器组网如何正确配置》,自己经历过的风雨,所以知道你也会坚强。你的【评论】 【点赞】 【关注】,我会自动解读为认可。


作者简介:

我是“网络系统技艺者”,系统运维工程师一枚,持续分享【网络技术 系统运维技术】干货。

栏目热文

文档排行

本站推荐

Copyright © 2018 - 2021 www.yd166.com., All Rights Reserved.