原创 本设研习社
01.厨房吊顶该如何施工？
1. 安装边角线
先经过详细的测量工作后使用“弹线法” 用墨水在墙面上弹出水平线，确定好水平位置，在每个线上范围做好相应的标记，方便后期将木方钉入孔隙。
01. How to construct the kitchen ceiling?
1. Install the corner line
After detailed measurement
Use the "snap line method" to snap a horizontal line on the wall with ink
Determine the horizontal position
Mark each line range accordingly
It is convenient to nail the wood square into the hole in the later stage
2. 厨房顶部悬吊丝杆膨胀支架，在空间顶部做好测量，尺度测量无误后打孔安装并标记，丝杆支架上的膨胀螺栓钉入孔眼进行安装，切记一定要使用膨胀螺栓，不要使用泡钉，就这样，在厨房的顶部装好了垂直的悬吊支架。
2. Hanging screw rod expansion support on the top of the kitchen
Make measurements at the top of the space
After the dimension measurement is correct, drill holes for installation and mark
The expansion bolt on the screw support is nailed into the eyelet for installation
Remember to use expansion bolts instead of foam nails
In this way, a vertical suspension bracket was installed on the top of the kitchen
3. 安装主龙骨和铝扣板
主龙骨将挂在这种垂直的支架上，再将副龙骨用金属垫片卡扣在在装好的主龙骨上，测量好尺寸没有问题
就可以安装铝扣板，在墙角边缘不规则的区域，根据位置裁剪出合适的大小再进行安装。
3. Install the main keel and aluminum gusset plate
The main keel will be hung on this vertical support
Then snap the auxiliary keel on the installed main keel with metal gasket
There is no problem measuring the dimensions
The aluminum gusset plate can be installed
In areas with irregular corner edges
Cut the appropriate size according to the position before installation
